Handi-Stick® Construction Adhesive |
|
|
|
|
|
|
|
Construction Adhesive P10132 |
24 oz (680g) Handi-Stick® Polystyrene Adhesive Gun Foam can be used as both an adhesive and an insulator, carrying an R-Value of 5 per inch (2.54 cm). It is also an excellent sealant for cracks and small holes. Handi-Stick® Construction Adhesive adheres to a variety of building materials and cures tack-free in less than 10 minutes. Handi-Stick® Construction Adhesive is applied with a dispensing unit, providing increased control and metering. These features help to reduce waste and save time. Fomo Products offers four styles of one-component dispensing units, designed to meet the user's specific requirements. |
• Drywall on studs or furring strips • Foam boards on concrete or plywood • Tile on plywood • Styrene insulation and fascias • UL-94 Recognized |
Case
12 /case |
$169.69
 |
• Data Sheet
• MSDS
• Instructions
• Handi-Stick® Construction Adhesive meets or exceeds the following Classifications, Codes and Standards: • ASHRAE 90-75 (Sec. 45.4) • ASTM C-557 • ASTM E-72 • ASTM E-84 (15.5%) Flame Spread 15, Smoke Developed 50 • CA 25-4 • CGSB 71.25 • HUD Minimum Properties Standard (Sec. 507-6) • UL Classified - File # R13919 |
|
Pallet 24 cs / plt |
Please Call |
|
Handi-Stick® Multi-Purpose Adhesive |
|
|
|
|
|
|
|
|

|
20 oz (567g) Handi-Stick® General Use Adhesive Gun Foam - Handi-Stick® Adhesives are one-component products and cure when ambient moisture in the air reacts with the adhesive. Handi-Stick® Adhesives are formulated with different open times to meet specific application requirements. All Handi-Stick® Adhesives meet ASTM E-84 Class 1 for adhesives and contain no volatile organic compounds or solvents to harm polystyrene board. For adhesive needs, choose Handi-Stick®. |
• Drywall • Insulation foam board • FRP panels • Ceramic tile |
Case
12 /case |
$150.00
 |
• Data Sheet
• MSDS
• Instructions
• Handi-Stick® Multi-Purpose Adhesive meets or exceeds the following Classifications, Codes and Standards: • ASTM D3498 • ASTM E-72 • ASTM E-84 (8.3%) • CA 25-4 • UL Classified - File # R18615 |
|
Pallet 24 cs / plt |
Please Call |
|
Handi-Stick® Sub-Floor Adhesive |
|
|
|
|
|
|
|
|
Sub-Floor Adhesive P10130
|
24 oz (680g) Handi-Stick® Sub-Floor Adhesive Gun Foam creates an extremely strong bond between the floor joist and sub-floor decking. Typically applied with the 22" (56 cm) steel dispensing unit, this adhesive flattens for maximum coverage and yield and adheres to wet, dry, frozen and/or treated lumber. Handi-Stick® Sub-Floor Adhesive is used to reduce squeaks, nail pops and sound transmission. Handi-Stick® Sub-Floor Adhesive is applied with a dispensing unit, providing increased control and metering. These features help to reduce waste and save time. Fomo Products offers four styles of one-component dispensing units, designed to meet the user's specific requirements. |
• Adhering sub-floor decking • Noise reduction |
Case 12 / case |
$183.60
 |
• Data Sheet
• MSDS
• Instructions
• Handi-Stick® Sub-Floor Adhesive meets or exceeds the following Classifications, Codes and Standards: • ASTM D-3498 • ASTM E-84 (8.3%) • CA 25-4 • HUD UM60a • UL Classified - File # R18615 |
|
Pallet 24 cs / plt |
Please Call |
|
One Component Foam Gun Accessories |
|
|
|
|
|
|
|
|
 F61020
|
22" (56cm) Steel Dispensing Unit • Ideal for sub-floor and other "hard to reach" applications • Long barrel for extended reach • Teflonized basket and needle valve • Built to withstand the rigors of construction |
• Ideal for hard-to-reach areas
• Great for sub floor applications
• Good for over-head projects |
22" |
$110.45
 |
• Instructions
|
|
 F61400
|
7" (18cm) Blue Polymer Dispensing Unit • Least expensive unit intended for limited reuse • Lightweight and economical • Abrasion resistant polymer |
• DISPOSABLE • Lightweight and easy to use |
7" |
$38.09
 |
• Instructions |
|
 F61110
|
7" (18cm) Convertible Dispensing Unit • Replacement parts available to recondition unit as required • Bottom threaded opening for optional attachment of Handi-Foam® Cylinder Foam (below) Dispensing Hose • Convertible to bottom load hose connection for cylinders • Highest level of durability |
• Intended for professionals who use both gun foam and cylinder foam.
• Convertible to bottom load hose connection for cylinders |
7" |
$136.13
 |
• Instructions |
|
 F61030
|
7" (18cm) Steel Dispensing Unit • Rugged dispensing unit designed to withstand the rigors of construction. |
• Rugged design to withstand rigors of construction
• Professional reliability
• Replacement parts available |
7" |
$70.19
 |
|